🐾 Creatures

Tiny Solar Cells Let Light Guide Living Cells

3 min read Tiny Why Newsroom · By Curio, Martian correspondent

Words
bioprinting

A lab method that builds tissue layer by layer with living cells.

bioink

A mixture of living cells and other materials used for bioprinting.

photovoltaic cell

A tiny cell that changes light into electrical current.

What happened

Penn State University, a US university, tested a way to guide the direction of living cells with light. The team placed tiny photovoltaic cells in different patterns on silicon chips. They then placed lung and skin fibroblasts on top. Fibroblasts are common cells found in connective tissue. The team used several light intensities.

Without light, the cells mostly pointed in random directions. With light, their directions matched the pattern of the photovoltaic cells below them. The team also found that light intensity changed the activity of the tiny cells. This changed how the living cells aligned.

Why cell direction matters

Bioprinting uses living cells and molecular signals to build tissue layer by layer in a lab. It can also support research toward making whole organs. The cell mixture used in this process is called bioink. A printer can place cells in a careful pattern at first. Later, cells can move, spread, and lose that pattern.

Researchers have known that weak electrical currents can influence cell alignment. Older setups often use electrodes tied to wires. Those systems need bulky electronic interfaces near the cells. The Penn State approach uses light instead. Photovoltaic cells capture light and turn it into electrical current. That current can influence the cells without a wired connection.

What the experiment tested

The team tested two kinds of design changes. In one test, they changed the diameter of the photovoltaic cells. The sizes ranged from just below one millimeter to 80 micrometers. Eighty micrometers is less than the width of a human hair. In another test, they kept the diameter similar but changed the overall pattern.

The lung and skin fibroblasts grew on the chips for seven days. The researchers compared illuminated chips with chips that received no light. The unlit cells showed mostly random alignment. The lit cells followed the pattern below them. Brighter light, or moving the light source closer, also changed photovoltaic activity.

The result suggests that size, shape, spacing, and light intensity can all become design controls. They can change the electrical field made by the photovoltaic array. That field can influence how groups of cells point and spread.

Why the result matters

The study points toward a wireless way to influence cell alignment. It may help researchers keep cells organized while studying printed tissue. It could also make it easier to test how different electrical patterns affect living cells.

Still, this is an early laboratory result. The method does not give complete control. Cell-to-cell interactions can still affect alignment. The work also tested cells on a flat surface. It did not show that the method can build a working three-dimensional tissue or organ.

What remains unknown

The researchers have not yet shown whether the electrical effect changes cell function, rather than only cell direction. They also have not tested more sensitive cardiac or muscle cells in this study. Results in a flat chip may not match results inside a three-dimensional structure. The report does not establish a medical treatment or a timetable for practical use.

What comes next

The team plans to study cardiac and muscle cells. It also hopes to test the method in three-dimensional spaces. A 3D arrangement could let researchers control electrical fields in more directions. For now, the work is a first step toward guiding living cells with light instead of wired electrodes.

More experimental details are available in the Penn State research release.

🐾 Creatures

How Light Helps Living Cells Line Up

📰 Full story: Tiny Solar Cells Let Light Guide Living Cells

Tiny light-powered cells helped guide living cells on a flat chip.

2 min read Tiny Why Newsroom · By Curio, Martian correspondent

Words
bioprinting

Building tissue in layers with living cells.

bioink

A mixture of cells and other materials for printing tissue.

photovoltaic cell

A tiny part that turns light into electricity.

💡 The gist

  • Penn State tested a new way to guide living cells.
  • Light changed how the cells lined up.
  • The test used flat chips, not finished organs.

What did the team do?

Penn State University, a US university, led this early experiment. The team studied how living cells keep their direction.

Bioprinting builds tissue in layers. It uses living cells and other materials. The cell mixture is called bioink. A printer can place cells carefully at first. Later, cells may move and spread. Their original pattern can become less clear.

Scientists have used weak electrical signals to guide cells. But older tools often need wires and electrodes. These tools can make the setup large and hard to place near the cells.

The Penn State team tried a different plan. It placed tiny photovoltaic cells on silicon chips. Photovoltaic cells change light into electricity. The team changed their size, shape, and spacing.

The researchers placed lung and skin fibroblasts above the tiny cells. Fibroblasts are cells found in connective tissue. The cells received different amounts of light for seven days.

Cells without light pointed in mostly random directions. Cells with light followed the pattern below them. Brighter light also changed the activity of the photovoltaic cells. Moving the light closer had an effect too.

Why did light change the cells?

The tiny photovoltaic cells made electrical current from light. This current changed the electric field near the living cells. An electric field is an area where electric forces act. Changing the tiny cells changed that field. The living cells then changed their direction.

This means researchers can adjust more than one part. They can change the tiny cells, their pattern, or the light. These controls may help scientists study how cells organize themselves.

What is still unknown?

The method does not control every cell perfectly. Cells can also affect one another. The experiment used a flat surface. It did not test a working 3D tissue or organ. Researchers still need to test heart and muscle cells.

Next, the team hopes to test three-dimensional spaces. It also wants to learn whether the electrical effect changes cell function. For now, this is a promising early experiment, not a medical treatment.

More details are in the Penn State research release.

🐾 Creatures

Light Helps Tiny Cells Point the Same Way

📰 Full story: Tiny Solar Cells Let Light Guide Living Cells

Scientists used light to help living cells point in similar directions.

1 min read Tiny Why Newsroom · By Curio, Martian correspondent

Words
photovoltaic cell

A tiny part that turns light into electricity.

bioprinting

Putting living cells into layers to make tissue.

Penn State University, a US university, studied tiny living cells.

Cells can join together to make body tissues. Scientists can place cells in layers. This process is called bioprinting.

After printing, cells can move around. Their directions can become mixed up.

The team placed tiny photovoltaic cells underneath them. Photovoltaic cells turn light into electricity.

The team put living cells above those tiny cells. Then it shone light on them. The light made a small electric signal. That signal helped the living cells point similarly.

Without light, the cells pointed many ways. With light, their directions matched the tiny pattern.

The test used flat chips. It did not make a working organ. Researchers will test heart and muscle cells next. They also want to test three-dimensional spaces.

Source: Penn State research release.

Sources